Frequently Asked Questions
Our manufactured stones are produced from lightweight aggregate, Portland cement, chemical additives, fly ash and permanent mineral oxide pigments. The pigments are absorbed into the base mix and become an integral part of the veneer, similar to natural stone. Minimal color changes occur with the oxide pigments.
Yes. Our manufactured stone is suitable for both interior & exterior applications.
Yes, with a fundamental understanding of stone masonry work.
No, the product is adhered to the wall.
Yes, but not in the fire box area.
Yes. Cold weather ambient temperature should be 40°F or higher. Hot weather conditions above 90° should be installed per section 2104.4 of the IBC.
ProDeus Stoneworks meets or exceeds the code requirements for ICC ES standards. Numerous tests were performed on the products to qualify for the AC-51 testing acceptance.
- Thickness: 1.5″ – 3″
- Weight: 7.5 to 12lbs. per sq. foot
- Packaging: cardboard container
- Sealing of stone: Yes, but not required
- Warranty: Yes, 50 Year Limited
Testing show no signs of product supporting or contributing to flame spread, combustion or smoke development.
Yes. The stove manufacturer clearances for combustible wall dimensions must be maintained.
Molds are cast from select pieces of natural stone capturing the details of the stone. The cast pieces are lighter in weight, which require no support footings, ties or lintels for support. Manufactured stone veneer can be adhered to surfaces that natural stone installations would be very costly to achieve. Usually manufactured stone is 30% to 50% of the installed cost of natural stone.